Defining Sntp Servers - Dell PowerConnect 54 Series User Manual

4 Select the Remove check box.
5 Click Apply Changes.
The entry is removed, and the device is updated.
Defining SNTP Authentication Settings Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the SNTP
Authentication page.
Table 6-7. SNTP Authentication CLI Commands
CLI Command
sntp authenticate
sntp authentication-key
number md5 value
The following is an example of the CLI commands:
console> enable
console# configure
Console(config)# sntp authentication-key 8 md5 ClkKey
Console(config)# sntp trusted-key 8
Console(config)# sntp authenticate

Defining SNTP Servers

The SNTP Servers page contains information for enabling SNTP servers, as well as adding new SNTP
servers. In addition, the SNTP Servers page enables the device to request and accept SNTP traffic from a
server. To open the SNTP Servers page, click System → SNTP → SNTP Servers in the tree view.
84
Configuring System Information
Description
Defines authentication for received Network Time
Protocol traffic from servers.
Defines an authentication key for SNTP.