Radius-Server Deadtime; Show Radius-Servers - Dell PowerConnect 3424 Cli Reference Manual

Example
The following example configures the timeout interval to 5 seconds.
Console(config)# radius-server timeout 5

radius-server deadtime

The radius-server deadtime Global Configuration mode command improves RADIUS response
time when servers are unavailable. The command is used to cause the unavailable servers to be
skipped. To return to the default configuration, use the no form of this command.
Syntax
radius-server deadtime deadtime
no radius-server deadtime
• deadtime — Length of time in minutes during which a RADIUS server is skipped over by
transaction requests. (Range: 0 - 2000)
Default Configuration
The deadtime setting is 0.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets the deadtime to 10 minutes.
Console(config)# radius-server deadtime 10

show radius-servers

The show radius-servers Privileged EXEC mode command displays the RADIUS server settings.
Syntax
show radius-servers
Default Configuration
This command has no default configuration.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY
263
Radius Commands