Command Mode
Global Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example maps CoS 7 to queue 2.
Console(config)# wrr-queue cos-map 2 7
show qos interface
The show qos interface User EXEC mode command displays interface QoS information.
Syntax
•
show qos interface [queuing | shapers |rate-limit] [ethernet interface-number | port-channel number]
•
queuing — Displays the queue's strategy (WRR or EF) and the weight for WRR queues and the
CoS to queue map and the EF priority.
•
shapers — Displays the shaper of the specified interface and the shaper for the queue on the
specified interface.
•
rate-limit — Displays the rate-limit configuration.
•
ethernet interface-number — Valid Ethernet port number.
•
port-channel number — Valid port-channel number.
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC mode.
User Guidelines
•
If no keyword is specified, port QoS information (e.g., DSCP trusted, CoS trusted, untrusted, etc.) is
displayed.
•
If no interface is specified, QoS information about all interfaces is displayed.
303
QoS Commands