Show Qos Interface - Dell 8 Command Reference Manual

16

show qos interface

show qos interface
Displays a summary of all QoS configurations applied on an interface.
Synopsis show qos interface {{in | ex}tengigabitethernet slot/port | linecard slot portset chip | all}
Operands interface
interface
linecard portset
all
Defaults There are no default configurations for this command.
Command EXEC mode
Modes
Description Use this command to display a summary of all QoS configuration applied on an interface, including
QoS Provisioning mode, CEE map, Layer 2 priority, Traffic Class mapping, congestion control, and
the scheduler policy.
Usage If no interface is specified, QoS information about all interfaces is displayed.
Guidelines
Examples To display all of the configured QoS information for a 10 Gbps Ethernet interface:
260
Use this keyword to specify any of the following interfaces:
extengigabitethernet
Specifies a valid external 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
intengigabitethernet
Specifies a valid internal 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
Use this keyword to specify any of the following interfaces:
Reports the QoS configuration for all 10 Gbps Ethernet interfaces within an
ASIC.
slot Specifies the ASIC linecard slot number within the chassis.
chip Specifies the ASIC number within the linecard.
Reports QoS configurations for all interfaces within the system.
switch#show qos interface intengigabitethernet 0/1
Interface InTenGigabitEthernet 0/1
Provisioning mode cee
CEE Map demo
Default CoS 0
Interface trust cos
CoS-to-CoS Mutation map 'default'
In-CoS:
-----------------------------------------------------
Out-CoS/TrafficClass: 0/4 1/4 2/6 3/4 4/4 5/4 6/4 7/4
Tail Drop Threshold 1081344 bytes
Per-CoS Tail Drop Threshold (bytes)
0 1 2 3 4 5
Dell Converged Enhanced Ethernet Command Reference
6 7
53-1002115-01