Managing Cisco Unified Ip Phones - Cisco CTS-500 Configuration Manual

Chapter 2 Configuring the Cisco Unified IP Phone for MIDlets
Step 7 Proceed to
Phone Configuration window.

Managing Cisco Unified IP Phones

Before You Begin
Before starting the following procedure, note the MAC address of the Cisco TelePresence phone device.
See the
Note You must restart your system after you have completed the configuration tasks in this section.
Use the tasks in this section to configure the Cisco Unified IP Phone for MIDlets. When you are finished
configuring your settings, click Save and follow the prompts to restart the system.
To configure the Cisco Unified IP phone, follow these steps:
Log in to the Cisco Unified CM Administration interface.
Step 1
From the Device drop-down menu, select Phone. The Find and List Phones Page appears.
Step 2
Search for a phone using the fields provided or select a phone from the drop-down menu.
Step 3
Search for a device type that contains "7970" or "7975."
Tip
Click Find. A list of devices appears.
Step 4
Click on a device in the Device Name (Line) column. The Phone Configuration page for that device
Step 5
appears.
In the Phone Type box, verify the following requirements:
Step 6
•
•
Enter information in the following sections found on the Phone Configuration page to configure the
Step 7
Cisco IP Phone 7975:
•
•
•
•
•
•
•
•
•
•
OL-21851-01
"Managing Cisco Unified IP Phones" section on page 2-3
Prerequisites section for information about determining the MAC address.
Phone Type-Cisco 7970 or Cisco 7975
Device Protocol-SIP
Device Information, page 2-4
Protocol Specific Information, page 2-7
Certification Authority Proxy Function (CAPF) Information, page 2-7
Expansion Module Information, page 2-8
External Data Locations Information, page 2-8
Extension Information, page 2-10
MLPP Information, page 2-11
Do Not Disturb, page 2-11
Secure Shell Information, page 2-11
Product Specific Configuration Layout, page 2-11
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
Configuring the Cisco Unified IP Phone
to configure the fields found in the
2-3