Parallel Printer Test Error Codes - HP 1850R - ProLiant - 128 MB RAM Troubleshooting Manual

Test Error Codes

400-499, Parallel Printer Test Error Codes

The 400 series of diagnostic error codes identifies failures with a parallel printer
interface board or system board functions. Corrective action may require replacement
of the serial/parallel interface board or the system board assembly.
Table B-5: Parallel Printer Test Error Codes
Error Code Description
401-XX Printer failed or not
connected
402-XX Printer data register failed
403-XX Printer pattern test failed
498-XX Printer failed or not
connected
B-6
Recommended Action
The following steps apply to error codes 401-XX
through 498-XX:
1. Connect the printer and retest.
2. Check the power to the printer and retest.
3. Install the loopback connector and retest.
4. Check the switch on the serial/parallel interface
board (if applicable) and retest.
5. Replace the serial/parallel interface board (if
applicable) and retest.
6. Replace the system board and retest.
HP Servers Troubleshooting Guide