6700-6799, Scsi Tape Drive Test Error Codes; Scsi Tape Drive Test Error Codes; 8600-8699, Pointing Device Interface Test Error Codes; Pointing Device Interface Test Error Codes - HP 1850R - ProLiant - 128 MB RAM Troubleshooting Manual

6700-6799, SCSI Tape Drive Test Error Codes

The 6700 series of diagnostic error codes identifies failures with the tape cartridge,
tape drive, media changer, tape drive cabling, SCSI adapter, or system board
assembly. Corrective action may require replacement of any of these parts.
Table B-14: SCSI Tape Drive Test Error Codes
Error Description
Code
6700-XX SCSI Tape ID drive types
test failed
6706-XX SCSI Disk SA/Media test
failed
6708-XX SCSI Controller test failed
6709-XX SCSI Disk Erase tape test
failed
6728-XX Media load/unload test
failed

8600-8699, Pointing Device Interface Test Error Codes

The 8600 series of diagnostic error codes identifies failures with the pointing device
(mouse, trackball, and so forth) or the system board assembly. Corrective action may
require replacement of the pointing device or the system board assembly.
Table B-15: Pointing Device Interface Test Error Codes
Error Description
Code
8601-XX Pointing Device Interface
test failed
HP Servers Troubleshooting Guide
Recommended Action
The following steps apply to error codes 6700-XX
through 6728-XX:
1. Run the server setup utility and check drive type.
2. Replace the SCSI Tape drive signal and power
cables and retest.
3. Replace the SCSI controller and retest.
4. Replace the SCSI Tape drive and retest.
5. Replace the system board assembly and retest.
Recommended Action
1. Replace with working pointing device and retest.
2. Replace the system board and retest.
Test Error Codes
B-15