HP 1850R - ProLiant - 128 MB RAM Troubleshooting Manual page 211

Table C-9: 800 Series POST Error Messages
Error Code
802-Processor X is
missing or terminator
board is not present.
System Halted.
803-Processor
speeds must match
for system operation.
System Halted
HP Servers Troubleshooting Guide
Audible Probable Source of
Beeps Problem
None The system detected that
the indicated processor
slot is empty.
None Two processors with
different speed ratings
are installed in the
system.
All installed processors
must have the same
speed rating for safe
operation.
continued
Action
1.
2.
3.
4.
1.
2.
POST Error Messages
Be sure that a processor
or processor terminator
board is installed in each
processor slot.
Reseat the processor or
processor terminator
board in each processor
slot.
Be sure that each
processor has a
corresponding Processor
Power Module (PPM)
installed.
Try replacing each
processor with a
processor terminator
board to detect a failed
processor or PPM.
Replace one of the
processors with a
processor terminator
board.
Replace one of the
processors with an
alternate processor rated
for the same operating
speed as the installed
processor.
continued
C-31