Diagnosing the Problem
When the Server Does Not Start
The following visual and audio clues indicate that the server is not starting:
•
The LEDs are off.
•
The fans are not spinning.
•
Something seems, looks, or sounds wrong or different.
•
There is physical damage to the system.
•
Something is cool that should be warm.
•
There are frayed cables.
•
The system does not follow the normal power-up sequence, as described in your
server-specific user documentation.
When a ProLiant ML, ProLiant DL, TaskSmart, or Previously Released Server
Does Not Start
Use the information in Table 1-2 to troubleshoot problems with a ProLiant ML,
ProLiant DL, TaskSmart, or previously released server.
Table 1-2: When the Server Does Not Start
What to Check
Check for connection problems:
•
Is the server power cord plugged
into a working grounded
(earthed) AC outlet?
•
Has the Power On/Standby
switch been firmly pressed?
•
Are there unconnected or loose
plugs or cables?
•
Are any connections loose or
improperly seated?
1-6
What to Do
Refer to "Loose Connections" in
Chapter 2.
HP Servers Troubleshooting Guide
continued