HP 1850R - ProLiant - 128 MB RAM Troubleshooting Manual page 197

Table C-4: 200 Series POST Error Messages
Error Code
207-Invalid Memory
Configuration -
Unsupported DIMM In
DIMM Socket X
Insufficient Timings
on DIMM.
207-Invalid Memory
Configuration -
Unsupported DIMM In
DIMM socket X
Only ECC DIMMs Are
Supported.
207-Invalid Memory
Configuration -
Unsupported DIMM In
DIMM socket X
DIMM Size
Parameters Not
Supported.
207-Invalid Memory
Configuration -
DIMMs must be
installed sequentially.
207-Invalid Memory
Configuration -
Incomplete bank
detected in bank X
207-Invalid Memory
Configuration -
Unsupported DIMM in
Board X, DIMM X.
Only Registered DDR
DIMMs are
Supported.
HP Servers Troubleshooting Guide
Audible Probable Source of
Beeps Problem
1 long, 1 Installed DIMMs are too
short slow.
1 long, 1 Installed DIMMs do not
short have ECC capability.
1 long, 1 Installed DIMMs in the
short same bank are of
different sizes.
1 long, 1 Installed DIMMs are not
short sequentially ordered.
1 long, 1 Bank is missing a DIMM.
short
1 long, Unregistered DIMMs
1 short
continued
Action
Replace DIMMs in indicated
slots with supported type.
Replace DIMMs in indicated
slots with supported type.
Replace DIMMs in indicated
slots with supported type.
Reinstall DIMMs in proper
order.
Install a DIMM to fill the bank.
Install registered PC 1600
ECC DDR SDRAM DIMMs.
POST Error Messages
continued
C-17