Table 1-4: When the Self-Tests Fail
What to Check
Check the system configuration:
•
What is the system
configuration for the:
•
•
•
•
•
•
Check component information,
such as:
•
•
•
•
•
HP Servers Troubleshooting Guide
Are all required switch
settings set correctly?
Memory
Processors; check speed,
type, and location
Cache memory
Controllers
Shadow RAM
Free space on the hard
drive
IRQ settings
I/O address
Direct memory access
(DMA) channels
Connector type
Do you have third-party
devices that may have
caused a conflict?
continued
What to Do
Refer to your server-specific user
documentation.
Run the Inspect Utility. Refer to:
•
"Inspect Utility" in Chapter 4
•
Your system configuration
settings; check the server
setup utility
Run the Survey Utility (for servers
running the Windows NT, Linux, or
NetWare operating system) and
Insight Manager.
Refer to:
•
"Survey Utility" in Chapter 4
•
"Server Management" in
Chapter 4
Refer to:
•
"Third-Party Devices" in
Chapter 2
•
Your third-party
documentation
Diagnosing the Problem
continued
1-13