HP 1850R - ProLiant - 128 MB RAM Troubleshooting Manual page 215

Table C-9: 800 Series POST Error Messages
Error Code
807-The password
has been cleared.
Please power off and
restore the clear
password switch
(SW2.1)
807-The Setup
password is cleared.
Please power off and
restore the clear
password switch
(SW1.1)
HP Servers Troubleshooting Guide
Audible Probable Source of
Beeps Problem
None The system switch
SW2.1 has been turned
on and the system
configuration password
has been cleared.
System switch SW2.1
must be returned to the
default off position for
normal operation and to
set a password with the
server setup utility.
None The system board
configuration switch
SW1.1 has been turned
on and the system
configuration password
has been cleared. SW1.1
must be returned to the
default off position for
normal operation and the
ability to set a password
with the server setup
utility.
continued
Action
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
POST Error Messages
Remove power from the
system.
Locate the system switch
SW2.1.
Check your server-
specific user
documentation for the
location of this switch.
Return system switch
SW2.1 to the off position.
Restart the system.
Press the F9 key and use
the server setup utility to
set a new password, if
desired.
Remove power from the
system.
Locate the system board
configuration switch.
Return SW1.1 to the off
position.
Restart the system.
Press the F10 key and
use the server setup
utility to set a new
password.
C-35