HP 1850R - ProLiant - 128 MB RAM Troubleshooting Manual page 213

Table C-9: 800 Series POST Error Messages
Error Code
806-CMOS has been
reset
Please power off and
restore the clear
CMOS switch
(SW2.2)
HP Servers Troubleshooting Guide
Audible Probable Source of
Beeps Problem
None The system switch
SW2.2 has been turned
on and the system
configuration data has
been cleared from
CMOS. This switch must
be returned to the default
off position for normal
operation and to save
configuration setup data.
The system must be
reconfigured.
continued
Action
1.
2.
3.
4.
5.
6.
7.
8.
POST Error Messages
Remove power from the
system.
Locate the system switch
SW2.2.
Check your server-
specific user
documentation for the
location of this switch.
Return system switch
SW2.2 to the off position.
Restart the system.
Press the F9 key to run
the server setup utility
and configure the
system.
Select the primary
operating system.
Set the date and time.
Complete additional
configuration as needed.
continued
C-33