Conﬁguration and installation summary This document summarizes the HP MSA FC VDS Hardware Provider components, conﬁguration, and installation. For more detailed procedures, please refer to the HP Modular Smart Array FC VDS Hardware Providers administration guide. Components The following hardware and software components are used with the HP Provider and an HP MSA disk array.
Software components IMPORTANT NOTE: The right combination of software versions is crucial to conﬁguring a working system. Refer to the the README ﬁles accompanying the HP Provider installation ﬁles for information about compatible software versions and system conﬁgurations. Follow all conﬁguration and installation instructions carefully.
Conﬁguration procedures Physically install and conﬁgure the disk array and the server as described below and in the manuals for those products. Refer to the diagram under Components for an overview of interconnections. Conﬁguration summary You will perform the following tasks during conﬁguration: VDS Provider Windows 2003 server: •...
Removal summary Before removing the HP VDS Provider, issue a net stop command from the command line, as shown below: net stop vds Uninstalling the HP Provider using Windows In Windows, select Start > Settings > Control Panel. Double-click Add/Remove Programs. Select the HP MSA VDS Hardware Provider program for removal.
This manual is also suitable for:
353803-b22 - storageworks modular smart array 1000 san starterAd510a - storageworks modular smart array 1500 cs 2u fibre channel san attach controller shelf hard driveAe326a - storageworks modular smart array 1500 san sata starterStorageworks 1000 - modular smart arrayStorageworks 1500cs - modular smart array353803-b22 - storageworks modular smart array 1000 san starter...