Memory Problems - HP 1850R - ProLiant - 128 MB RAM Troubleshooting Manual

Hardware Problems
Table 2-6: Memory Problems
Problem
Out of memory.
Memory count error.
Server fails to recognize
existing memory.
2-18
Possible Cause
Memory configuration
may not be set up
correctly or you have run
out of memory to run the
application.
Memory modules may
not be installed correctly.
Server fails to recognize
the complete amount of
memory.
Possible Solution
1. Check the application documentation
to determine the memory
configuration requirements.
2. Check for operating system errors.
3. Check the memory count during
Power-On Self-Test (POST)
messages. If the memory count is
wrong, complete the steps shown for
a memory count error.
1. Be sure that the memory modules
have been installed correctly. Refer
to your server-specific user
documentation.
2. Be sure that the memory modules
are properly seated.
3. Check the error information for your
operating system.
4. Restart the server. If the POST
count is still wrong, replace the
memory.
1. Reseat the memory.
2. Run the server setup utility.
3. If the server still fails to recognize
the memory, then replace the
memory.
HP Servers Troubleshooting Guide
continued