HP 1850R - ProLiant - 128 MB RAM Troubleshooting Manual page 61

Table 2-6: Memory Problems
Problem
Server fails to recognize
new memory.
Server fails to recognize
new memory (continued).
HP Servers Troubleshooting Guide
continued
Possible Cause
Memory count error
occurs.
There may be a conflict
with existing memory.
Memory may not be
installed properly.
The memory installed
may not be compatible
with your server or may
have exceeded limits set
for the server or
operating system.
Memory may have failed.
Possible Solution
1. Be sure that the memory modules
have been installed correctly. Refer
to your server-specific user
documentation.
2. Be sure that the memory modules
are properly seated.
3. Run the server setup utility.
4. Restart the server. If the POST
count is still wrong, replace the
memory.
1. Check the IML.
2. Check for conflicts with existing
memory.
3. Run the server setup utility.
1. Be sure that the memory is properly
seated.
2. Be sure that the memory modules
have been installed correctly. Refer
to your server-specific user
documentation.
1. Be sure that the memory installed is
the correct type of memory for your
server.
2. Be sure that you have not exceeded
the memory limits of the server or
operating system. Check the
appropriate documentation.
1. Test by installing memory into a
working server.
2. Replace the memory. Refer to the
procedures in your server user
documentation.
Hardware Problems
2-19