Internal Modem Error Codes - HP 9000 Series Service Manual

Internal Modem Error Codes

Modem Error: 100
Error Message:
Cause:
Action:
Modem Error: 108
Error Message:
Cause:
Action:
Modem Error: 112
Error Message:
Cause:
Action:
Modem Error: 116
Error Message:
Cause:
Action:
Modem Error: 120
Error Message:
Cause:
Action:
Chapter 5
***ERROR - unable to access the internal modem port.
(MODMERR100)
1. The Access Port card is defective.
Replace the Access Port card.
***ERROR - Unable to communicate with the internal modem
(MODMERR108)
The modem is defective or not installed properly.
Check Access Port card installation or replace Access Port card .
***ERROR - Unable to communicate with the modem
(MODMERR112)
The modem port or modem is not properly configured.
Run the port configuration test to check for proper configuration.
***ERROR - EPROM checksum test failed (MODMERR116)
The modem is defective.
Replace the Access Port card.
***ERROR - RAM check test failed (MODMERR120)
The modem is defective.
Replace the Access Port card.
Dx50/Dx60 Front Panel LCD Codes
5-33