Possible Causes; Memory Error Codes And Warning Messages; Memory Error Codes - HP 3000/9x9KS Series Upgrade Manual

Possible Causes

• SIMMS not seated properly
• SIMMs not sequenced correctly
• SIMMs not paired
• Incorrect value matching of paired SIMM
Repeat the SIMM installation procedures in Chapters 1 or 2, taking special care to seat the SIMMs
properly and in the correct pair sizes and sequence.

Memory Error Codes and Warning Messages

If memory is incorrectly installed, certain memory error codes may appear on the front panel LCD
display. In addition, warning messages may appear on the console display after the system is booted.

Memory Error Codes

Memory error codes are displayed on the front panel liquid crystal display (LCD). The memory error
codes listed in Table 3-1 on page 4are those that indicate the possibility that memory extenders or
SIMMs have been incorrectly installed.
NOTE
Other memory error codes not listed in Table 3-1 on page 4may appear on the front
panel LCD. If an unlisted code appears, call your nearest HP Service Center for
assistance.
Chapter 3
Power On and Verification
Installation Verification
3- 3