6000-6099, Network Interface Controllers Test Error Codes; Network Interface Controllers Test Error Codes - HP 1850R - ProLiant - 128 MB RAM Troubleshooting Manual

6000-6099, Network Interface Controllers Test Error
Codes
The 6000 series of diagnostic error codes identifies failures with various network
interface controllers. Corrective action may require replacement of the controller.
Table B-10: Network Interface Controllers Test Error Codes
Error Description
Code
6000-XX Network card ID failed
6001-XX Network card setup failed
6002-XX Network card transmit failed
6014-XX Network card configuration
failed
6016-XX Network card reset failed
6028-XX Network card internal failed
6029-XX Network card external failed
6089-XX Network card open failed
6090-XX Network card initialization
failed
6091-XX Network card internal
loopback failed
6092-XX Network card external
loopback failed
HP Servers Troubleshooting Guide
Recommended Action
The following steps apply to error codes 6000-XX
through 6089-XX:
1. Check the controller installation in the EISA slot
and retest.
2. Check the interrupt type and number setting and
retest.
3. Check the media connection at the controller and
Multistation Access Unit (MAU) and retest.
4. Check the media speed (4/16) and type
Unshielded Twisted Pair/Shielded Twisted Pair
(UTP/STP) settings and retest.
5. Check the MAU, cabling, or other network
components and retest.
6. Replace the controller and retest.
Test Error Codes
B-11