urmet domus IPerCom 3.0.0 System Technical Manual For The Installer page 88

When setting the date and time of the system, it is recommended to check that the date and time of
your PC are correct.
If the system is connected to a router with an Internet connection, the correct date and time are
already provided by the NTP (Network Time Protocol) service.
6.10.7 Transferring the system configuration
After configuring date and time, to apply the configuration to the system, simply go to the "Configuration"
tab. The screen displayed is as follows:
88
Figure 66: date and time aligned with those of the PC
Figure 67: local configuration not yet transferred to the system
MT124-032M