urmet domus IPerCom 3.0.0 System Technical Manual For The Installer page 176

If the presence of a 1060/1 Server is requested, the configurator signals its lack in the configuration via a
message when saving the configuration itself (see paragraph How to save the configuration):
Figure 202: message on configurator in the absence of Server 1060/1
If the 1060/1 Server is added to the configuration but is not physically installed on the system, during the
saving phase the configurator allows you to save the configuration but when you try to apply it via IPerCom
Installer Tools the following message is shown:
Figure 203: message on IPerCom Installer Tools in the presence of Server 1060/1 added on the configurator but not present on the system
7 5 5+
In addition, the MAX, VOG , VOG , VOG video door phones, Switchboard and IPerCom Client applications
show a screen like the one below:
Figure 204: message on MAX, VOG 7 , VOG 5 , VOG 5+ , Switchboard and IPerCom Client in the presence of Server 1060/1 added on the configurator but
not present on the system
176 MT124-032M