urmet domus IPerCom 3.0.0 System Technical Manual For The Installer page 214

To create the new contact, press the "Add new contact" button. The following page is displayed:
The following shows the meanings of the four fields:
Name
Scope
Target
Visibility Filter
214
Figure 256: New contact creation screen
Name of contact
Scope of the contact.
This shows the node in which you are creating the contact; if the
topological node is different from the apartment, you can establish
whether the contact should be public or private (it is public by
default).
The recipient of the contact, i.e. who should be contacted. It can
be a device or a set of devices connected in a topological node.
Selectable list of the types of devices which must use the contact.
Variable according to the type of contact.
The complete list includes the following items:
- "Video door phone with address book",
- "Call Modules",
- "Apartment station via T1 button",
- "Apartment station via T2 button",
- "Apartment station via T3 button",
- "CallMe".
Table 9: Meaningful fields for creating a contact
MT124-032M