urmet domus IPerCom 3.0.0 System Technical Manual For The Installer page 340

After naming the time profile and pressing the "OK" button, the new time profile will be added to the time
profile list.
Figure 446: List of the created time profiles
The buttons in the columns "Edit" and "Delete" allow you to modify the data or delete each time profile
created, respectively (through confirmation pop-up).
If you want to associate the time profile "Weekly Swimming Pool Access" to the previously saved access
profile, simply reopen the latter in edit mode and select the created time profile, as shown in the following
figure:
Figure 447: Selection of the new time profile in the saved access profile
A time profile may also be associated with a single access as well as an access profile if the concerned
access has time restrictions. To do this, you need to go to the "Topology" page, then to the "Devices" tab.
Press the "Edit" button of the device, the access of which must be associated with a time profile and search
for the "Time Profile" item of the concerned access.
340 MT124-032M