urmet domus IPerCom 3.0.0 System Technical Manual For The Installer page 710

APPENDIX V: Template of the list of devices installed in the system
If the installer adds the devices via Mode 3.1 during the configuration phase (paragraph 8.4.2.5), it is
necessary that the basic information of each device (type and MAC address) as well as its topological
location are written down during the installation of the system.
At the end of the installation phase, you will find a list of devices, each with an associated topological node.
For your convenience, here is a template of this list that can be printed and used by the installers of the
system.
710 MT124-032M