urmet domus IPerCom 3.0.0 System Technical Manual For The Installer page 520

Main Door settings
Enabled
Door Profile (#)
Door Name (#)
Door Time (s) (#)
Door Forced Alarm (#)
Max Door Opening Time (s) (#)
Door Lock Type (#)
Door Under Secret (#)
Time Profile (#)
Remote Relay (#)
Remote Sensor (#)
520
The item Yes enables the main door: in this case the
following options are shown, marked with a hash mark (#).
The item No disables the main door.
Default value: Yes.
This allows you to associate a previously created door profile
with the concerned main door. In this case, the door
parameters are automatically compiled (besides the name).
Default setting: Custom (parameters must be compiled
manually).
Name to assign to the main door.
Pulse duration on the control relay. Default value: 3s.
If selected, if the door is forced, the current event sends an
alarm to the Switchboard.
If selected, if the accessed is forced, the concerned event
sends an alarm to the Switchboard.
It allows you to choose the type of lock installed on the main
door (see note reported below).
If selected, by pressing the door opener button (from an
indoor station) it is possible to activate the electric lock of
the outdoor station only when the caller is in conversation
or is waiting for a response. If not selected, the door can also
be opened outside call mode from the apartments the
topological path of which intercepts the Call Module. Default
setting: selected.
This allows you to associate a temporal profile to the main
door. Access will be valid only within the selected time
profile (except for residents of apartments whose
topological path intercepts the Call Module). Default setting:
none.
It allows you to remotely control the relay that operates the
main door of the Call module. For further details, see
paragraph Remote relay functions, remote entrance hall
button and remote sensor.
It allows you to remotely control the sensor that signals that
main door has been left open. For further details, see
paragraph Remote relay functions, remote entrance hall
button and remote sensor.
Table 26: Main door settings
MT124-032M