2.17 Miro door phone 1160/3
The Miro door phone 1160/3 is a hands-free audio apartment station.
It is provided with a door opening button and four buttons for optional functions, two of which are
configurable for use in the IPerCom system.
In addition to the normal door phone functions, it also allows call forwarding to a smartphone/tablet via
the CallMe app (for Android and iOS).
2.18 Relay actuator 1060/84 v. 2.07
The Relay Actuator 1060/84 is an IP device, which can be used to activate two electrical loads via double
exchange relay capable of working in bistable or monostable timed mode. The activation of the relays in
monostable or bistable mode occurs through events generated by Call Module, Entry Panel, Modular Entry
Panel with 1060/48, Private Call Module, Key Reader, apartment station or locally through the inputs of the
Relay Actuator itself.
2.19 Relay actuator 1060/84 v. 3.04
The activation of the relays in monostable or bistable mode occurs through events generated by call
stations, key readers, and apartment stations or locally through the inputs of the Relay Actuator. The same
inputs (properly programmed) can activate one or more outputs of several Relay Actuators and generate an
alarm towards the Switchboard application.
2.20 Relay actuator 1060/84 v. 4.05
The Relay Actuator 1060/84 is an IP device, which can be used to activate two electrical loads via double
exchange relay capable of working in bistable or monostable timed mode. The activation of the relays in
monostable or bistable mode occurs through events generated by call stations, key readers, and apartment
stations or locally through the inputs of the Relay Actuator. The same inputs (properly programmed) can
activate one or more outputs of several Relay Actuators and generate an alarm towards the Switchboard
application. The Relay Actuator 1060/84 with firmware version 4.05 is the only one that supports the
remote relay function, remote entrance hall button and door open remote sensor.
30
MT124-032M
Need help?
Do you have a question about the IPerCom 3.0.0 and is the answer not in the manual?