urmet domus IPerCom 3.0.0 System Technical Manual For The Installer page 258

To create the activation rule, press the "Add New Activation" button on the "Activations" screen. The same
view screen opens for creating of activations with event on Entry Panel that can be used to set all the
parameters needed to build the activation rule.
The "Event" drop-down menu allows you to select the event to be associated to one or more Relay
Actuator or Lift interface outputs.
The possible topological events for the Relay Actuator device are
•
"Door Opening", i.e., an event caused by pressing the door opening button (generic or a specific
door) on the apartment station;
•
"Gate Opening", i.e., an event caused by pressing the gate opening button (generic or a specific
gate) on the apartment station;
•
"Incoming Call", i.e., incoming call event on the apartment station;
•
"User Activation", i.e., event generated by the user via MAX, VOG
door phones or Miro door phone;
•
"Lift Up" and "Lift Down" (lift function), events enabled only on stair, floor, and apartment nodes;
•
"Panic alarm", i.e., an event triggered by pressing the panic button on the apartment station.
•
"Switchboard Activation", i.e., activation rules that appear only on the Switchboard application.
Switchboard activations are shown only on the Switchboard application and only if they are
created on its topological path.
258
Figure 317: Screen for creating an activation with a topological event
7 5+
, VOG , Basic or VOG
MT124-032M
5
video