urmet domus IPerCom 3.0.0 System Technical Manual For The Installer page 269

Select the Relay Actuator in the "Output" area to display the outputs to be configured. The outputs must be
set in monostable mode and the relay activation duration must be enabled in the device configuration page
(see APPENDIX A: Configuration parameters of IPerCom devices).
Figure 334: activation screen of the Relay Actuator
7
In the "Video Door Phone System" screen of the MAX, VOG or Basic video door phones or IPerCom Client
application belonging to the topological group of the "Stair 01" node, a new "LIFT" icon will appear
(highlighted in red).
Figure 335: "LIFT" button
MT124-032M 269