Advertisement
10.4 Factory reset of Door Phones Miro
To restore default parameters of an Miro door phone after entering programming mode, hold button T1
pressed for longer than 5 seconds, hold buttons
and
pressed for longer than 5 seconds. The device
will generate 2 long beeps and reboot.
Figure 668: Miro door phone
The reset to factory settings can be carried out also via the Ipercom Installer Tools application
(button
of the Diagnostic tab).
MT124-032M
503
Advertisement
Need help?
Do you have a question about the IPerCom 3.0.0 and is the answer not in the manual?