urmet domus IPerCom 3.0.0 System Technical Manual For The Installer page 385

Configuration of the system and parameters of the call forwarding function (installer)
Using the IPerCom Installer Tools application, the installer creates the project and the related configuration,
that is defines the system topology, adds the devices on the topological nodes, assigns appropriate names
to the devices, apartments, and topological nodes, creates the address books, the users, and activations,
configure the parameters of the call forwarding function in the "System" section of the configurator (as
shown below):
Figure 502: call forwarding parameters in tab "System"
In correspondence with the "Call Forwarding" item, check that the value is set to "Enabled", as shown in
the figure above.
In correspondence with the "Call Forwarding Cloud URI" item, it is necessary to set the server on which the
user is registered via the CallMe app: the default server is "sip.urmet.com", while the server
"cn.sip.urmet.com" is to be used only for the Chinese market.
The "Call forwarding quality" item must be set based on the available bandwidth: if you encounter
problems in the call, such as jerky video and/or incomprehensible audio, it is best to lower the quality of
call forwarding call.
The "CallMe Manager Support" item must be disabled, as the item "IPerCloud Test Mode".
MT124-032M 385