urmet domus IPerCom 3.0.0 System Technical Manual For The Installer page 327

Pressing the "Add" button, the following screen appears:
Figure 423: adding a group
The "Name" and "Description" fields allow you to give a meaningful name and description to the group you
are creating.
The "Add" button in the "Access Table" section allows you to associate a previously created access profile
to the group (see chapter Access control).
In the "Lift Interface Setting" section, it is possible to set the Lift Interface activations (if present in the
system) according to the established paths.
To add (for example) residents just press on the "Add" button (red box). The following screen is displayed:
Figure 424: adding users to a group
MT124-032M 327