urmet domus IPerCom 3.0.0 System Technical Manual For The Installer page 206

In relation to the case of IPerCom systems in IPerCloud mode, if the presence of a 1060/1 Server is
requested, the configurator signals any lack of it in the configuration via a message when saving the
configuration itself (see paragraph
If the 1060/1 Server is added to the configuration but is not physically installed on the system, during the
saving phase the configurator allows you to save the configuration but when you try to apply it via IPerCom
Installer Tools the following message is shown (within 5 minutes):
Figure 246: message on IPerCom Installer Tools in the presence of Server 1060/1 added on the configurator but not present on the system
7
In addition, the VOG , VOG
show a screen like the one below:
Figure 247: message on MAX, VOG
206
How to save the
Figure 245: message on configurator in the absence of Server 1060/1
5+ 5
, VOG , MAX video door phones, Switchboard and IPerCom Client applications
7 , VOG 5 , VOG 5+ , Switchboard and IPerCom Client in the presence of Server 1060/1 added on the configurator but
not present on the system
configuration):
MT124-032M