urmet domus IPerCom 3.0.0 System Technical Manual For The Installer page 46

5 System commissioning
The commissioning of a system essentially involves:
•
setting the date and time
•
the creation of the project, which also includes configuration
•
the application (distribution) of the configuration to the system;
•
securing the system
To commission a system, the installer can use:
•
the IPerCom Installer Tools application for Windows,
•
the configuration menu on the MAX, VOG
We recommend using the IPerCom Installer Tools application, whose new features will be explained in
detail in the paragraph
For IPerCom systems in IPerCloud mode it is mandatory to use the IPerCom Installer Tools
application.
The date and time setting on IPerCom Installer Tools and MAX video door phone is carried out in different
ways. In both cases it is essential to set the correct date and time on the system to avoid malfunctions
related to the configuration distribution. In this way the devices in the system equipped with internal clock
have the date and time set correctly and can distribute it to the rest of the system.
The creation (or change) of the configuration on IPerCom Installer Tools, MAX, VOG
phones is done by calling the IPerCom Configurator application (or more simply configurator).
The creation (or the change) of configuration can only be done by one user at a time and the system
prevents two open configuration sessions on the same system (on IPerCom Installer Tools and on a MAX,
7
VOG or Basic video door phone).
7
MAX, VOG or Basic video door phones, via the configurator, allow to create and saving the configuration
(file with ccf extension) within the project. The configuration is then distributed to the various devices in
the system. The configuration files can be imported to the configurator (or exported from the configurator)
using a micro-SD card.
IPerCom Installer Tools, via the configurator, allows saving the configuration associating it to a project. The
configuration is then transferred to the various devices in the system. IPerCom Installer Tools too allows
importing a configuration file (with ccf extension) from PC and associating it to a project previously created.
A generic project can be exported to PC and imported to other PCs. These concepts will be explained in
detail in paragraph "Commissioning a system through IPerCom Installer
46
;
.
"Commissioning a system through IPerCom Installer
;
7
and Basic.
Tools".
7
or Basic video door
Tools".
MT124-032M