urmet domus IPerCom 3.0.0 System Technical Manual For The Installer page 413

In the Target Selection section, you can choose whether:
•
assign licenses to all the apartments present on the topological node "Floor 010100" (item
"Process all apartments"),
•
assign licenses to only the selected apartments (item "Process only selected apartments").
In the License Operation section, select the item "Assign licenses to apartments".
In the License Type section, select the activated license bundle.
Then press the "Execute" button to associate the licenses with the 3 apartments.
The correct outcome of the procedure is confirmed by the following dialog box:
The assignment of licenses can be carried out by positioning on any topological node. For example,
if there are several floors with IPerCloud apartments, you can position yourself on the relevant
upper stair node and assign licenses from this node. Similarly, if there are IPerCloud apartments on
different stairs, it is sufficient to assign the licenses by positioning on the relevant upper block
node.
MT124-032M
Figure 544: licenses correctly assigned to apartments
413