urmet domus IPerCom 3.0.0 System Technical Manual For The Installer page 168

The Switchboard and IPerCom Client applications can also be updated by downloading the relevant
executable files from the website www.urmet.com.
If one or more 1060/1 Servers are present in the system and in configuration and at least one has the
"Automatic update by Server" option enabled, it is also possible to connect devices to the system that are
not aligned with the correct IPerCom version: these will be updated in automatically by the Server itself.
Similarly, if you start one of the out-of-date Switchboard and IPerCom Client applications, the Server will
take care of updating them to the correct version.
After updating the non-aligned devices to the correct IPerCom version, the screen notifying the
misalignment automatically disappears.
If the not-aligned devices are disconnected from the system, the message on IPerCom Installer Tools
automatically disappears in the following cases:
•
system without Server 1060/1 and not-aligned devices not present in the system configuration;
•
system without Server 1060/1 and not-aligned devices present in the system configuration;
•
system with Server 1060/1 and not-aligned devices present in the system configuration.
If there is a 1060/1 Server in the system and the not-aligned devices are not in configuration, every time
IPerCom Installer Tools is started, the dialog box indicating the presence of not-aligned devices is shown,
even if these have been disconnected from the system.
In this case after pressing the "Status" button, simply press the "Update device list" button, as shown
below:
168
Figure 193: "Update device list" button
MT124-032M