urmet domus IPerCom 3.0.0 System Technical Manual For The Installer page 488

9 Integration with the iPerTAlk system
IPerCom enables the integration of the iPerTAlk system PBX Ref. 1375/10 - 10A - 11 - 11A - 12 - 12A - 13 -
13A. This integration is useful for the following video door phone features:
•
Audio or audio-video calls from Ipercom call stations to iPerTAlk internal extensions;
•
Audio-video calls from Ipercom indoor stations to iPerTAlk internal extensions;
•
Audio or audio-video calls from iPerTAlk internal extensions to Ipercom 1060/41 switchboards and
vice versa;
•
Gate opening (pedestrian door or driveway) from iPerTAlk internal extensions;
•
Auto-on function from internal iPerTAlk extensions to Ipercom call stations;
•
Auto-on function from Ipercom indoor stations to iPerTAlk call stations;
Auto-on function from Ipercom indoor stations to iPerTAlk RTSP cameras.
It is necessary that the iPerTalk version is 2.2.5 or higher to allow integration with the iPerCom
system.
Two integration modes are possible:
•
with iPerTAlk switch Ref. 1375/701 in presence of an internal network in the iPerTAlk system and
you want to separate the network where iPerTAlk is installed from the IPerCom network;
•
without iPerTAlk switch Ref. 1375/701 when using iPerTAlk as gateway to Voip phones on the
Ipercom network.
9.1 Configuration and installation sequence for integration of the iPerTAlk system into the
IPerCom system with the switch Ref. 1375/701
The following configuration steps must be followed for proper operation.
488 MT124-032M