urmet domus IPerCom 3.0.0 System Technical Manual For The Installer page 448

After entering all the data correctly, it is possible to press the "OK" button to start creating the new
configuration as described in paragraph
Once the configuration is finished, the Project tab of the configurator allows you to:
•
save the project (Save and Save As buttons);
•
close the project (Close button) to create a new one (New button) or quit the configurator (Quit
button) to return to the launcher;
•
directly quit the configurator (Quit button) to return to the launcher.
The Project tab screen with all the options just described is shown below:
448
The configurator.
Figure 600: "Project" tab of the configurator
MT124-032M