urmet domus IPerCom 3.0.0 System Technical Manual For The Installer page 134

After entering the new password and pressing the "OK" button, it is possible to check in real time that the
installer password change process is correctly performed. Once the procedure is complete, the following
screen is displayed:
The installer password update does not affect devices such as Lift Interface, Relay Actuator, Key
Readers, RTSP Cameras, IPassan Controller and iPerTAlk Server.
The installer password is requested every time it is necessary to modify the configuration file of an
IPerCom system through the configurator (regardless of whether the system is unlocked or locked).
6.16.2.2 System block
If the IPerCom system is unlocked, it is necessary to press the "Lock" button (red arrow) to block it:
134
Figure 137: installer password modification successfully performed
Figure 138: how to block the system
MT124-032M