urmet domus IPerCom 3.0.0 System Technical Manual For The Installer page 298

It is possible to select the alarm type to be sent to the Switchboard from the drop-down menu with the red
box. The available alarms are listed below:
Figure 380: Available alarms
For example, if you select the "Door Forced" alarm, press the "OK" button to see the list of inputs on the
screen. Then press "OK" again to see what you have just created:
Figure 381: Alarm associated with the input
The buttons in the "Edit" and "Delete" columns can be used to edit or delete data for each alarm,
respectively (via confirmation pop-up).
A single input can generate an alarm and simultaneously activate one or more relay outputs.
298 MT124-032M