urmet domus IPerCom 3.0.0 System Technical Manual For The Installer page 263

If you want to replace the activation on the apartment with a custom one, just press the replacement
button and change the data.
Assuming you want to change the Relay Actuator output from "Output 2" to "Output 1" in the previous
created activation, a screen like this will appear (the activation rule is no longer greyed out):
7.1.5.8.1.1 Addition of a user activation on video door phones / door phones / CallMe application
When creating a user activation rule, it is possible to choose which type of apartment station/application to
add via the "Filter" field. The possibilities are summarized below:
•
addition of the activation rule on video door phones with address book, that is MAX, VOG
Basic, and IPerCom Client application (corresponds to the "VDP" item in the "Filter" section);
•
addition of the activation rule on the VOG
to the "ADP T1" or "ADP T2" entries in the "Filter" section);
•
addition of the activation rule on the CallMe application (corresponds to the "CallMe" item in the
"Filter" section).
Below is an explanation of what the user must do to make the activation work (for example to turn on the
staircase lights) based on the choices made above.
MT124-032M
Figure 325: Replacement of the activation on the apartment with a personalised one
5
video door phones and Miro door phone (corresponds
7 5+
, VOG ,
263