urmet domus IPerCom 3.0.0 System Technical Manual For The Installer page 401

After carrying out the configuration, it is necessary to apply it to the system. To do this, you must first save
the configuration and exit the configurator. Then select the "Configuration" tab and press the "Apply
changes" button to transfer the configuration to the system:
Figure 524: configuration transfer
After applying the configuration to the system, the installer must carry out the test mode: this mode is
useful for verifying that the call from any calling station to a test IPerCloud apartment arrives correctly at
the CallMe application.
Therefore, to carry out the test mode, the installer must have downloaded, installed, and started the
CallMe app on his smartphone/tablet and then log in with the same account used on IPerCom Installer
Tools.
MT124-032M 401