urmet domus IPerCom 3.0.0 System Technical Manual For The Installer page 218

In the "Scope" column, the abbreviation "VDP" indicates that the contact is available only for video
door phones with phonebook. Similarly, the abbreviations "DP1", "DP2" and "DP3" indicate that the
contact is available for the Miro door phone or 1761/6 video door phone while the abbreviation
"CallMe" indicates that the contact is available on the CallMe application. The abbreviation "CM"
(when appears) indicates that the contact is available only for outdoor station with display. These
abbreviations appear consistently with the choices made in the "Device Filter" section (where they
are also reported).
In this manner, the new contact "Dental Practice" will appear in the address book of the MAX video door
phone of apartment "0101010102" and can call it or start a chat with it
In the list of contacts, the buttons in the "Edit" and "Delete" columns can be used to edit or delete data for
each contact, respectively (via confirmation pop-up).
If you want to add the dental practice also to the address book of MAX video door phone in the apartment
"0101010103", you need to create the contact directly on floor node "01010101##" as a public type
contact, to display it in the address books of all the apartments of the floor. In order to do this, open the
"Address books" screen at the floor node and proceed as described above to fill in the "Name", "Target"
and "Visibility Filter" fields.
The "Scope" field, instead, confirms the "PUBLIC" selection so that the contact will appear in the address
books of all MAX video door phones of the nodes which belong to the floor node, i.e. of all the apartments
present on the floor "01010101##".
218
Figure 262: adding the desired contact on the plan
.
MT124-032M