urmet domus IPerCom 3.0.0 System Technical Manual For The Installer page 112

Figure 104: project aligned to the remote site
If remote access has not been enabled, after entering the password and / or system identification,
the following error message appears:
Figure 105: remote access not enabled by configurator
Once the configuration is aligned, it is necessary to request permission from the building manager to
modify the configuration. In fact, in the "Urmet Cloud" tab a screen like the one below appears:
Figure 106: unauthorized remote installer
You need to press the "Request the administrator to authorize you as an installer" button to obtain
permission to make changes to the configuration. For further details see the section Transfer of the
site ownership to another installer.
112 MT124-032M