urmet domus IPerCom 3.0.0 System Technical Manual For The Installer page 454

You get to the same screen if you want to use an Android tablet and then the IPerCom Configurator app to
create a new project. Once the app starts, it is necessary to press the New button and then select the
IPerCom version for which you want to create the new configuration. The screen displayed is as follows:
As you can see, the screen to define the system topology (both for the MAX, VOG
phone and the IPerCom Configurator app) is like what described in paragraph
the other possible steps for the configuration of a system, i.e.:
1. definition of the topological structure,
2. addition of the devices to the configuration,
3. creation of the directories,
4. creation of activations,
5. creation of residents and non-residents,
6. setting of the access control,
7. configuration of the system parameters and call forwarding.
454
Figure 607: Selecting the plant model when creating a project
7
or Basic video door
The configurator, as well as
MT124-032M