urmet domus IPerCom 3.0.0 System Technical Manual For The Installer page 434

After having entered the password, you will be asked to change the date and time of the system.
8.2.1 Date and time setting
The first step of the system commissioning is to set the correct date and time.
Date and time are used to identify configuration files and determine which one is the most up-to-date
during the automatic distribution between devices; therefore, as already mentioned, it is essential to set
them correctly before proceeding with the following steps.
If the system is connected to the Internet, the date and time are set automatically.
Manual setting instead is usually suggested:
• as soon as you access the configuration menu of a non-configured MAX, VOG
phone;
• after starting up a MAX, VOG
than 36 hours without an IPerCom Clock Module or without Server 1060/1 (this requires resetting the
date and time outside the configuration menu).
434
Figure 578: How to set date and time
7
or Basic video door phone if the system has been switched off for more
7
or Basic video door
MT124-032M