urmet domus IPerCom 3.0.0 System Technical Manual For The Installer page 530

In the RTSP streaming settings, to set the IP address it is recommended to follow the instructions in
APPENDIX F: Configuration of RTSP cameras in an IPerCom system.
It is possible to configure any NVR device of the Urmet range to record the calls made by the Call
Module 1060/23 and related auto-on activations from an apartment station. APPENDIX M shows
the procedure for configuring the NVR device 1098/304 with the Modular Entry Panel 1060/48. For
the configurations of the other NVR devices in the Urmet range, contact the Urmet Service Centre.
The "Add" button in the "Activations" section has already been described in paragraph Activations.
The "Select" button in the "Images" section allows loading a welcome image on the calling station display.
Supported file formats include also the most common ones like jpg, bmp and png. We recommend
uploading images with an aspect ratio of 200x58 pixels: this way the image will not be cropped. Once an
image is uploaded, you can delete it using the "Delete" button.
The address book of the Call Module is automatically created by importing the residents (set as
visible) of all apartments in the topology group of the Call Module itself.
530 MT124-032M