urmet domus IPerCom 3.0.0 System Technical Manual For The Installer page 188

For the configuration of the other devices, it is therefore necessary to:
•
position on the node where you want to add the device (through the navigation module);
•
press the "Add Devices" button;
•
choose the device to be added from the list of categories;
•
configure the device;
•
press the OK button in the relevant configuration screen.
In "APPENDIX A: Configuration parameters of IPerCom
the IperCom devices are shown and explained in detail.
For each node selected in the "Settings" tab it is possible to customise the name of the node in
question through the "Name" field.
A
DDING DEVICES TO THE CONFIGURATION USING THE
.
SYSTEM
The "Topology" tab and the relative "Devices" tab appear as shown below:
Figure 221: screen page through which to add the devices with connection to the system
188
devices" the configuration parameters of all
"S "
HOW NEW DEVICES BUTTON WITH CONNECTION TO THE
MT124-032M