urmet domus IPerCom 3.0.0 System Technical Manual For The Installer page 304

To set the time to sunrise and sunset (corresponding to your geographical location), see the
paragraph Sunrise/Sunset Settings
Press the "Select" button to open a screen page where you can choose the absolute time or the offset (in
hours and minutes) to associate with the sunrise or sunset:
Below are 3 examples of how the "Time" section appears, if you choose in order an absolute time (7:00
am), a time referred to sunrise in Milan and a time referred to sunrise in Milan with one hour offset:
304
of the chapter on system parameters.
Figure 390: choice of absolute time or offset to associate with sunrise or sunset
Figure 391: absolute time
Figure 392: sunrise set to Milan
Figure 393: sunrise set to Milan with one hour offset
MT124-032M