As you can see, "installer_1_urmet" is no longer authorized to make changes to the plant site and must ask
the new building manager/installer for authorization via the "Request site installer status to Building
Manager" button.
On the contrary, "installer_2_urmet" is the new building manager/installer of the system as shown below:
It is also possible for the installer to cancel the transfer procedure, in the same way as for the
transfer to building manager.
S
ITE ALREADY TRANSFERRED TO A BUILDING MANAGER
If the site has already been transferred to the building manager via the "Transfer site to Building Manager"
button, this means that the installer/building manager has completed his task and transferred the site to
the building manager. For example, if "installer_urmet" transfers the site to the building manager
"administrator_urmet" and "administrator_urmet" accepts the invitation, the following appears in the
"Urmet Cloud" tab of IPerCom Installer Tools (the login to Urmet Cloud was done with the user
"installer_urmet"):
In this case the "Hand over site to another installer" button transfers only the ownership of installer to the
new person and not that of building manager which remains with the " admin_urmet" person; on the
contrary, the " admin_urmet" subject will only have the ownership of building manager and not that of
installer, and will therefore be able to make changes to the site only via the CallMe Manager application.
MT124-032M
Figure 127: site transferred to another building manager/installer
Figure 128: transfer site to the building manager
127
Need help?
Do you have a question about the IPerCom 3.0.0 and is the answer not in the manual?