urmet domus IPerCom 3.0.0 System Technical Manual For The Installer page 681

Protocol configuration
To use the modular Entry panel with 1060/48 on the NVR 1098/304, it is necessary to define the
communication protocol that will be used between the two devices.
1. Access the NVR 1098/304 device as indicated in the paragraph
NVR 1098/304
2. On the PARAMETER
3. In the displayed screen, press on PROTOCOL MANAGE.
MT124-032M
device".
tab under DISPLAY – IP CHANNELS press USER-DEFINED USER.
"Check the firmware version of the
681